PENGARUH DIOCTYL ADIPATE TERHADAP SIFAT RHEOLOGIKAL HTPB TERPLASTISISASI (EFFECT OF DIOCTYL ADIPATE ON THE RHEOLOGICAL PROPERTIES OF PLASTICIZED HTPB)

Afni Restasari, Luthfia Hajar Abdillah, Rika Suwana Budi, Kendra Hartaya

Abstract

Pengembangan pengetahuan terhadap sifat rheologikal isian cair dari propelan berguna untuk mendapatkan sifat slurry yang optimum. Pengembangan ini dapat dimulai dari campuran HTPB-DOA sehingga penelitian ini bertujuan untuk mengetahui pengaruh DOA terhadap sifat rheologikal HTPB-DOA yang meliputi sifat alir terhadap shear rate, viskositas dan viskositas saat zero shear rate. Dalam metodenya, DOA divariasi 0, 5, 10, 15 dan 20% dan dicampur dengan HTPB. Sifat rheologikal dipahami dengan mengukur viskositasnya pada kecepatan putar 0,5; 1; 1,5; 2; 2,5; 3; 4 dengan spindel tipe 2 dari viskometer Brookfield dan menganalisa grafik shear stress vs shear rate serta viskositas vs shear rate. Berdasarkan analisa tersebut, diketahui bahwa campuran HTPB-DOA bersifat shear thickening. Semakin banyak DOA yang ditambahkan, semakin rendah viskositas campuran, semakin rendah nilai viskositas pada zero shear rate dan semakin kuat sifat shear thickening dari campuran.

Keywords

Rheologi, Plasticizer, Binder Propelan, Shear Thickening, Polimer.

Full Text:

PDF

References

Bogdan, F., & Bednarczyk, A. M. (2015). Studies of Rheological Properties of Suspension of Heterogeneous Rocket Propellant Based on HTPB Rubber. CHEMIK, 69(3), 136–145.

Brzić, S., Dimić, M., Jelisavac, L., Djonlagić, J., Ušćumlić, G., & Bogdanov, J. (2015). Influence of Polyglycidyl-type Bonding Agents on the Viscoelastic Properties of a Carboxylterminated poly(butadiene-co-acrylonitrile)-based Composite Rocket Propellant. Central European Journal of Energetic Materials, 12(2), 307–321.

Chhabra RP, & Richardson JF. (2008). Non-Newtonian Flow and Applied Rheology Engineering Applications (2nd ed.). Burlington: Elsevier Ltd.

Dalsin, S. J., Hillmyer, M. A., & Bates, F. S. (2014). Molecular Weight Dependence of Zero-Shear Viscosity in Atactic Polypropylene Bottlebrush Polymers. ACS Macro Letters, 3(5), 423–427. https://doi.org/10.1021/mz500082h

Dey, A., Athar, J., Sikder, A. K., & Chattopadhyay, S. (2015). Effect of Microstructure on HTPB Based Polyurethane (HTPB-PU), 5(April), 145–151. https://doi.org/10.17265/2161-6221/2015.3-4.005

Ding, J., Tracey, P. J., Li, W., Peng, G., & Whitten, P. G. (2013). Review on shear thickening fluids and applications.pdf. Textile and Light Industrial Science and Technology, 2(4), 161–173.

Fessenden, R. J., & Fessenden, J. S. (1997). Kimia organik. Jakarta: Erlangga.

Fulmer, M. S. (2000). Introduction to Lubricants and Additives for Polymer Compounds. Retrieved from http://www.struktol.com/pdfs/Lubricants.pdf.

George Wypych. (2017). Handbook of Plasticizers (3rd ed.). Toronto: ChemTec Publishing.

Gupta, B., Kumar, V., & N, S. (2014). Rheological Studies on Virgin, Plasticized and Solid Filled HTPB Binder System. Global Journal of Advanced Engineering Technologies and Sciences, 1(2), 41–48.

Gurkan, A., Deger, S., Zekeriya, T. K., & Teoman, T. (2014). ylmaz2014.pdf. Journal of Applied Polymer Science, 40907–40914. https://doi.org/10.1002/APP40907

Hu, W., Su, Y., Zhou, L., Pang, A., Cai, R., Ma, X., & Li, S. (2014). Molecular Dynamics of Neutral Polymer Bonding Agent (NPBA) as Revealed by Solid-State NMR Spectroscopy. Molecules, 19, 1353–1366. https://doi.org/10.3390/molecules19011353

Jaishankar, A., Wee, M., Matia-Merino, L., Goh, K. K. T., & McKinley, G. H. (2015). Probing hydrogen bond interactions in a shear thickening polysaccharide using nonlinear shear and extensional rheology. Carbohydrate Polymers, 123, 136–145. https://doi.org/10.1016/j.carbpol.2015.01.006

Jong, H. C., Sangmook, L., & Jae, W. L. (2017). Non-Newtonian Behavior Observed via Dynamic Rheology for Various Particle Types in Energetic Materials and Simulant Composites. Korea-Australia Rheology Journal, 29(1), 9–15. https://doi.org/10.1007/s13367-017-0002-6

Kim, H. J., Kwon, Y., & Kim, C. K. (2013). Thermal and Mechanical Properties of Hydroxyl-Terminated Polybutadiene-based Polyurethane/Polyhedral Oligomeric Silsesquioxane Nanocomposites Plasticized with DOA. Kim. J Nanosci Nanotechnol, 13(1).

Li, H., Wang, J., & An, C. (2014). Study on the Rheological Properties of CL-20 / HTPB Casting Explosives. Central European Journal of Energetic Materials, 11(2), 237–255.

Liu, X., Sun, X., Hong, X., Pang, A., & Qiao, Y. (2018). Research Progress of Bonding Agents for Nitramine Composite Solid Propellants. International Journal of Astrophysics and Space Science, 6(2), 44–50. https://doi.org/10.11648/j.ijass.20180602.11

Mahanta, A. K., & Pattnayak, P. K. (2015). Green analytical methods for determination of intrinsic viscosity of hydroxyl terminated polybutadiene. J. Mater. Environ. Sci, 6(9), 2377–2385.

Manu, S. K. (2009). Glycidyl Azide Polymer (GAP) as a High Energy Polymeric Binder for Composite Solid Propellant Applications. Mahatma Gandhi University.

Muthiah, R., Somasundaran, U. I., Verghese, T. L., & Thomas, V. A. (1989). Energetics and Compatibility of Plasticizers in Composite Solid Propellants. Defence Science Journal, 39(2), 147–155.

Remakanthan, S., Kk, M., Gunasekaran, R., Thomas, C., & Thomas, C. R. (2015). Analysis of Defects In Solid Rocket Motors Using X-Ray Radiography. The E-Journal of Nondestructive Testing, 20(6).

Restasari, A., & Abdillah, L. H. (2017). Pengaruh Dioctyl Adipate Terhadap Pot-Life Proopelan Berformula AP Trimoda. In Prosiding SIPTEKGAN XXI (pp. 314–322). Tangerang: Pusat Teknologi Penerbangan, LAPAN.

Shaw, M. T. (2016). On Estimating The Zero-Shear-Rate Viscosity: Tests with PIB and PDMS. In AIP Conference Proceeding. American Institute of Physics. https://doi.org/10.1063/1.4965543

Tomasz, G., Katarzyna, G.-S., Karolina, J., & Lukasz, K. (2018). Rheological and Thermal Properties of Mixtures of Hydroxyl-Terminated Polybutadiene and Plasticizer (Rapid communication). Polimery, 63(1), 53–63. https://doi.org/10.14314/polimery.2018.1.9

Umerova, O., Dulina, O., & Ragulya, V. (2015). Rheology of plasticized polymer solutions. Journal of Silicate Based and Composite Materials, 67(4), 119–125.

Wagner, C. E., Barbati, A. C., Engmann, J., Burbidge, A. S., & McKinley, G. H. (2016). Apparent shear thickening at low shear rates in polymer solutions can be an artifact of non-equilibration Caroline. Applied Rheology, 26(54091). https://doi.org/10.3933/APPLRHEOL-26-54091

DOI: http://dx.doi.org/10.30536/j.jtd.2018.v16.a3003

Refbacks

  • There are currently no refbacks.