SISTEM PENYALA NIRKABEL JARAK JAUH UNTUK MUATAN ROKET (WIRELESS SWITCHING FOR ROCKET PAYLOAD)
Abstract
Proses penyalaan sistem elektronika pada muatan roket hasil litbang LAPAN selama ini masih manual, dengan menggeser atau menekan saklar pada tabung muatan roket dari posisi mati (OFF) ke posisi hidup (ON). Sistem penyala muatan roket ini dirancang untuk dapat menyalakan atau mematikan muatan roket dengan tanpa melakukan kontak fisik antara operator dengan roket. Dari hasil penelitian ini, muatan roket dapat dinyalakan ataupun dimatikan dari ruang kontrol (ground station) secara nirkabel. Sistem ini juga dapat melepaskan perangkat antarmuka untuk sistem penyalaan dari badan roket, sehingga tidak mengganggu roket saat diluncurkan.
Â
Currently, process for turning on the LAPAN rocket’s payload still manually, by shifting or pushing the manual switch placed on the payload rocket’s body, to the OFF or ON direction/ position. This payload wireless switching system is designed for turning the rocket payload to ON or OFF wirelessly, without any phisical contact from operator to the rocket body. The experiment proof that the rocket payload can be turning ON or OFF from the control room wirelessly. The system can also release the umbilical interface from the rocket body before the rocket launched to prevent disruption.
Keywords
Full Text:
PDFReferences
Arisandi, E. D. (2017). Sistem Pengaman Power Shape-Charge Pada Flight Termination System ( Power Shape Charge Security System On Flight Termination System), 21–28. Jurnal Teknologi Dirgantara, vol.15 No.1, Juni 2017.
Delap, D., Glidden, J., & Lamoreaux, C. (2013). Development of the Orion Crew-Service Module Umbilical Retention and Release Mechanism. Conference Proceedings of the 15th European Space Mechanisms & Tribology Symposium, (September), 25–27.
Beauvoy,R. (1959). Transistor switching-circuit design using the charge-control parameters, (2970),Proceeding at the International Convention on Transistors and Associated Semiconductor Devices, May 1959).
Dobrescu, L., Smeu, R., & Dobrescu, D. (2016). Load switch power MOSFET SPICE model. Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, EPE 2016, (Epe), 644–647. https://doi.org/10.1109/ICEPE.2016.7781418
Genc, N., & Koc, Y. (2017). Experimental verification of an improved soft-switching cascade boost converter. Electric Power Systems Research, 149, 1–9. https://doi.org/10.1016/j.epsr.2017.04.015
Gosselin, A. M. (2007). Automated Ground Umbilical Systems ( AGUS ) Project. Proceedings. The Space Congress.
Satrya, E., & Wigati. (2013). Beberapa Masalah Dalam Proses Pembuatan Roket Seri Rx/Rkx-100 (Problems In The Production Process Of Rocket Rx/Rkx-100. Majalah Sains Dan Teknologi Dirgantara, 8(2), 70–77.
Wang, Y., Hu, X., & Fu, L. (2016). Design and realization of multi-function serial port with high-speed/large-capacity/asynchronous FIFO. IEEE International Conference on Control and Automation, ICCA, 2016–July, 227–231. https://doi.org/10.1109/ICCA.2016.7505280
Xue, F., Chen, L., Wang, L., Pang, Y., Chen, J., Zhang, C., & Wang, Z. L. (2016). MoS 2 Tribotronic Transistor for Smart Tactile Switch. Advanced Functional Materials, 26(13), 2104–2109. https://doi.org/10.1002/adfm.201504485
Zambou, S., Magunje, B., Rhyme, S., Walton, S. D., Idowu, M. F., Unigbe, D., … Härting, M. (2016). Variable temperature performance of a fully screen printed transistor switch. Solid-State Electronics, 126, 59–66. https://doi.org/10.1016/j.sse.2016.09.014
Refbacks
- There are currently no refbacks.